- NTN BEARING USA CORP.
- Ball Bearings Miniatures Ball Bearings Thin Section Ball Screw Support Bearings
English
Home>Products>Deep Groove Radial Ball Bearings>10mm x 28mm x 8mm SKF 16100-skf Deep Groove Radial Ball Bearings
SKF 16100-skf MODELS
Need a CAD or 3D Model?
10mm x 28mm x 8mm SKF 16100-skf Deep Groove Radial Ball Bearings
category
Deep Groove Radial Ball Bearings
SKF 16100-skf Bearing SPECIFICATIONS
With over 10170 full-service stores, our 10mm x 28mm x 8mm SKF 16100-skf Deep Groove Radial Ball Bearings inventory 10mm x 28mm x 8mm is NTN BEARING USA CORP. extensive and our parts are priced right. within 24 1.1 mm rs min hours. This helps you maximize your productivity by saving time and your hard-earned > C5 Radial clearance class dollars.
- SKF
16100-skf
- SNR
- > C5
- 1.1 mm
- 41.5 mm
- 0 kN
- 1 mm
- 50 rpm
- 0.01 kN
-
NTN BEARING USA CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
10mm x 28mm x 8mm SKF 16100-skf Deep Groove Radial Ball BearingsSpecifications
- SNR
- > C5
- 1.1 mm
- 41.5 mm
- 0 kN
- 1 mm
- 50 rpm
- 0.01 kN
- 13.8
- 0.27 kg
- 10mm x 28mm x 8mm
SKF 16100-skf 10mm x 28mm x 8mm SKF 16100-skf Deep Groove Radial Ball BearingsProduct description
SKF 16100-skf bearing Size Chart (mm/inches) | |
|---|---|
| Bearing number | 71902 ACE/P4AH |
| Size (mm) | 28x15x7 |
| Bore Diameter (mm) | 28 |
| Outer Diameter (mm) | 15 |
| Width (mm) | 7 |
| d | 15 mm |
| D | 28 mm |
| B | 7 mm |
| d1 | 19.1 mm |
| d2 | 18.1 mm |
| D1 | 23.9 mm |
| K | 0.5 mm |
| C1 | 4.3 mm |
| r1,2 - min. | 0.3 mm |
| r3,4 - min. | 0.15 mm |
| a | 9.1 mm |
| da - min. | 17 mm |
| db - min. | 17 mm |
| Da - max. | 26 mm |
| Db - max. | 27.2 mm |
| ra - max. | 0.3 mm |
| rb - max. | 0.15 mm |
| dn | 20 mm |
| Basic dynamic load rating - C | 3 kN |
| Basic static load rating - C0 | 1.3 kN |
| Fatigue load limit - Pu | 0.057 kN |
| Limiting speed for grease lubrication | 68000 r/min |
| Limiting speed for oil lubrication | 106000 mm/min |
| Ball - Dw | 3.969 mm |
| Ball - z | 12 |
| Gref | 0.2 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 0.87 |
| Calculation factor - Y0 | 0.38 |
| Calculation factor - X2 | 0.41 |
| Calculation factor - Y1 | 0.92 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Preload class A - GA | 28 N |
| Preload class B - GB | 84 N |
| Preload class C - GC | 170 N |
| Calculation factor - f | 1.04 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.04 |
| Calculation factor - f2C | 1.07 |
| Calculation factor - fHC | 1 |
| Preload class A | 34 N/micron |
| Preload class B | 51 N/micron |
| Preload class C | 66 N/micron |
| d1 | 19.1 mm |
| d2 | 18.1 mm |
| D1 | 23.9 mm |
| C1 | 4.3 mm |
| r1,2 min. | 0.3 mm |
| r3,4 min. | 0.15 mm |
| da min. | 17 mm |
| db min. | 17 mm |
| Da max. | 26 mm |
| Db max. | 27.2 mm |
| ra max. | 0.3 mm |
| rb max. | 0.15 mm |
| dn | 20 mm |
| Basic dynamic load rating C | 3.02 kN |
| Basic static load rating C0 | 1.34 kN |
| Fatigue load limit Pu | 0.057 kN |
| Attainable speed for grease lubrication | 68000 r/min |
| Attainable speed for oil-air lubrication | 106000 r/min |
| Ball diameter Dw | 3.969 mm |
| Number of balls z | 12 |
| Reference grease quantity Gref | 0.2 cm³ |
| Preload class A GA | 28 N |
| Static axial stiffness, preload class A | 34 N/µm |
| Preload class B GB | 84 N |
| Static axial stiffness, preload class B | 51 N/µm |
| Preload class C GC | 170 N |
| Static axial stiffness, preload class C | 66 N/µm |
| Calculation factor f | 1.04 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.04 |
| Calculation factor f2C | 1.07 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.015 kg |
SKF 16100-skf INTERCHANGE
Deep Groove Radial Ball Bearings Part series 16100-skf is a potential replacement for these common bearing part numbers:
16100-skf
16100-skf
16100-skf
16100-skf
16100-skf
16100-skf
16100-skf
16100-skf
Contact Us
- NTN BEARING USA CORP.
- Address1600 E. Bishop Court, P.O. Box 7604,Mount Prospect, IL 60056-7604, U.S.A.
- Phone(Working Time)298-5268
- Fax
SKF 16100-skf Technical Articles
| How do I know if my NTN Bearing is real? |
| How does a pillow bearing work? |
| How important is wheel bearing? |
Deep Groove Radial Ball Bearings CATEGORIES
- Ball Bearings Miniatures
- Ball Bearings Thin Section
- Ball Screw Support Bearings
- Deep Groove Bearings
- Deep Groove Radial Ball Bearings
- Double Row Angular Contact Bearings
- Double Row Self Aligning Bearings
- Radial Ball Bearings
- Single Row Angular Contact Bearings
- Spherical Roller Bearings
- Taper Roller Bearings
- Thrust Bearings
- SKF Lgev 2 Bearing
- SKF 6003 2rs Bearing
- 22313 Bearing
- Bearing 6309 C3
Customers Who Viewed SKF 16100-skf Bearing Also Viewed
45mm x 100mm x 36mm SKF 62309-2rs1-skf Deep Groove Radial Ball Bearings
45mm x 85mm x 23mm SKF 62209-2rs1-skf Deep Groove Radial Ball Bearings
45mm x 75mm x 23mm SKF 63009-2rs1-skf Deep Groove Radial Ball Bearings
45mm x 75mm x 10mm SKF 16009-skf Deep Groove Radial Ball Bearings
45mm x 75mm x 10mm SKF 16009/c3-skf Deep Groove Radial Ball Bearings